Friday, July 26, 2013

Forge World Newsletter #352 - SoH Reaver Squad and Despoiler Squads

As always all the important bits below:


=========================================

Horus Heresy

Hi there,
Up for pre-order this week we have Mk II, Mk III and Mk IV Despoiler squads, and a unique Sons of Horus unit in the form of the Reaver Attack Squad. As well as this, we also have some exciting news regarding this weekend’s Games Day North America.

Sons of Horus Reaver Attack Squad
Sons of Horus Reaver Attack Squad
Reaver squads in many ways epitomised the Sons of Horus Legion’s way of war. Heavily influenced by the tactics used in the incessant tribal warfare of Cthonia, Reaver units specialised in lightning-swift assaults which maimed and disabled their foes; striking down leaders, and mercilessly cutting down any who were weak or isolated. Each Reaver unit, whether squad or entire company in strength, was effectively a warband in its own right, and its warriors fought more as individuals than regimented soldiers, and all were utterly lethal against the enemies of Mankind during the Great Crusade. 
The Sons of Horus Reaver Attack Squad, designed by Alfonso Giraldes, is a multi-part resin kit containing five incredibly detailed Space Marines, five bolt pistols, five chain axes, a power fist, a hand flamer, five helmeted heads and one Sergeant head. This kit is available to pre-order now for despatch from Friday 2nd August.
Rules for the Sons of Horus Reaver Attack Squad will be found in our forthcoming Horus Heresy book.
Legion Despoiler Squads
Legion Despoiler Squads
If fighting is expected to be at close quarters, such as in boarding actions or trench clearance, Tactical squads can sometimes forgo the standard bolter in favour of the combination of a bolt pistol and chainsword, allowing the Astartes more manoeuvrability in whatever tight confines they may find themselves in. These more assault orientated units are referred to as Despoiler Squads within the Legiones Astartes.

 
The Mk II, Mk III and Mk IV Despoiler Squads, designed by Will Hayes, are complete multi-part resin kits comprising five Space Marines armed with bolt pistols and chainswords. All three kits are available to pre-order now for despatch from Friday 2nd August.
 
Event News
Games Day North America
Imperial Armour Apocalypse
Forge World will be over in Memphis this weekend for Games Day North America. We will have limited quantities of our new Imperial Armour: Apocalypse book available on the day, and you can find out more about the contents of the book and what units and formations you'll find within here. Those of you fortunate enough to be attending the event will also have a final chance to get hold of some of our 2012 Show only figures in the US: the Imperial Enforcer with Cyber Mastiff and the Warhammer Forge Skin Wolf.


Tuesday, July 23, 2013

Hobby Update - Project Raptor and Baneblade WIPs

Hi Folks,
just to show I haven't been idle lately (a lot of wedding planning and visiting has been going on) its time to update on what work has passed through the workspace recently.

First up we have Project Raptor, one third of the project is now assembled (minus cockpit) and I must say the model looks awesome and is better then I thought it would be, I just hope I do it justice when I get to paint it.

Also over the weekend I spent time sat in the garden building the Baneblade I have had in the cupboard for about two years. The model is great, very clever and a lot bigger then I remembered. My only gripe is I really don't like the track assembly, the links just don't seem to gel when being built but over all I really like the model.

Hopefully these will get sprayed up before I go off in August for my honeymoon. I also need to finish some Chimeras and if time allows to get my Russes assembled and some guard stripped. Any updates or useful things I will share before then :)

any questions or requests for images of things I might have worked on please let me know.

Wednesday, July 17, 2013

News - The Bolter & Chainsword Updates

Folks, time for some great news from the Bolter and Chainsword. See the below updates from their facebook group.


Brother Argos here
... I have spent most of the day trying to organise a new server and the tech team who will configure it and get our data back. I ended up feeling a bit useless not being able to do the work myself and was getting frustrated.

However as I was just about to go to bed I decided to check the donations@bolterandchainsword Paypal account to see how we were doing and was completely a...mazed / stunned.

We have raised just over $4000 in less than 18 hrs or so.

This will let us get a very good server for our new home and help considerably with our running costs. We can now afford the linux server guru I want to use to do the work I cannot. After a pretty bad weekend with no server and diminishing hope, my faith in the basic good nature of humanity (gamers especially) is restored.

Looking at the results, I think we need to thank you all for your contributions. No matter how big or small you stood up and were counted. We got donations as large as $500 - $1000, all the way down to $1 or $2.

I am going to leave the donations page up, as the more we get will help with further costs. In the morning I will purchase a new server for us, and let the Techmarines who don't require bionic eyes get down to work.

Well done everyone who donated ...

The Emperor Protects!

- Brother Argos
 
Further update from the B&C:

New server purchased, hardware components being assembled by the hosting team now. They should be finished by 10pm GMT at the latest.

Next stage will be operating system install, which will most probably take place tomorrow.

After that they still have to move 260gb of data from the damaged drive onto the new server and start setting up the web side of things.


==========================================
 
So folks, it looks awesome and soon the B&C will be back! Gives me an excuse to interact more and get some more power armoured models worked on.
 

Monday, July 15, 2013

News - The Bolter & Chainsword is currently Offline

Folks this is too important to leave off the page! Please read and support the nets favourite Power Armoured Forum.

The Bolter & Chainsword is currently Offline.


On Friday 12th the Bolter & Chainsword appeared to suffer a hard drive failure, replacement drives were purchased but failed to remirror correctly when added to the server. Eventually after much testing it was discovered the server hardware was causing the problem and it appears we will need to purchase a new server. Given the age of the server (10yrs - it was installed in 2003) this was expected to some degree and we have some funds from previous donation drives saved for this.

However the timing for this event is not good, Brother Argos who pays for the B&C and is also the technical admin has for the last 6-9 months been fighting severe proliferative diabetic retinopathy, had numerous operations on his eyes and unfortunately has lost a significant amount of his sight. We had hoped he would be recovered enough after his last operation to help us move to the planned new server, however given the timing of the current scenario this will not happen.

We have found a technical resource, who can rebuild and move the B&C to a new home, however this will be chargable. As it currently stands the Bolter & Chainsword needs to raise around $800 - $1000 in addition to the funds we currently have put by to make this happen.

Brother Argos has funded the B&C to the tune of $18,000 dollars over the last 10 years, so that we could all enjoy our community, he is not in a position given his illness to rescue us now.

It is your community, if you wish it to survive you need to raise around a $1000, if we raise more it will all help get a better server for our new home.

There is a paypal button below which sends money to donations@bolterandchainsword.com, if you have enjoyed visiting the Bolter & Chainsword click the button below and show us.

As and when we get more information you can find us at Our Facebook page we will also update this holding page.

Remember the words of Roboute Guilliman Primarch of the Ultramarines - "to admit defeat is to blaspheme against the Emperor"

Thursday, July 11, 2013

Airsoft Armoury - MICH 2000 Helmet Completed

Well folks the work has been completed and the pictures are finally here. Some time ago I started work on my MICH and bought a load of odds and sods for it as seen here:


As you can see this was origionally going to be a MICH with a marpat cover, however since I bought all these items I moved away from Marpat and over to Multicam so decided the cover wasnt really suitable. I decided then to spray the helmet and move to a patterned design.

In the end the parts used were the NVG mount, a set of Ops Core Rails, the surefire replica, an emerson chin strap and the velcro i ordered. The origional strap bought was flawed and unusable so i had to replace it.

To paint the helmet it was base coated Sand before being wrapped in the Scrim net in the picture above. Once wrapped I dusted the helmet with Olive Drab and Dark Earth paints, both mixed well and gave the finish below:




Personally despite the bulk of the helmet compare to my FAST helmet i like the effect. There seems to be something missing and i would like to add some more bits to the helmet, I just cant put my finger on what to add though.

So there you have it, the completed (at least base completion) of the MICH 2000.

Any thoughts and comments on the helmet would be great.



Tuesday, July 09, 2013

The Terminator Armour Open Challenge - The Results

Hi Folks,
the The Terminator Armour Open Challenge is now over and its time for the results. First though thanks to all those that entered and to everyone that has voted, your participation is appreciated.

so without further ado here are the results:


As you can see we have a clear winner, that winner with 10 votes is Submission 3 - A Blood Angels Librarian by Guido
 
Submission 3
 
Please see the link above for more details and pictures of the winning entry. Congratulations to all who entered and a massive well done to Guido.

Now all that remains is for me to present Guido with his prize this week.

Thursday, July 04, 2013

The Terminator Armour Open Challenge - Final Days For Voting


Hi Folks,
the The Terminator Armour Open Challenge is now on the last 2 days for voting. Please vote and give the guys that have entered your support.

Before you vote here are a round up of the Entries with links to each page:
Submission 1
Submission 2
Submission 3
Submission 4
Submission 5
Submission 6

So folks there you have the round up of entries, it was a fun competition with some nice entries.

Voting buttons are located at the top right of the blog page (and have had to be split in to two sections due to a glitch with blogger).

Thanks for reading and good luck to all competing

Monday, July 01, 2013

Mondays Mirthful Meandering - 01.07.13

an oldy but a goody from the Plastic Dudesmen, a bit of CSI Malleus!